Everybody welcomes the season of spring after long and harsh winter weather. The spring season also brings many changes along with it. Flowers start blooming Read More
Why Is It Important?
Every season requires a different type of preparedness, and spring is no exception either. Your HVAC system needs exceptional attention while the season changes from winter to spring. In the entire winter season, your HVAC system handles all types of adversities such as snow, ice and dirt etc. Your system must endure some types of winter damage, no matter how much you were ready in advance. Therefore you have to inspect your HVAC system before turning it on. If you end up starting a faulty AC unit without proper inspection, you can easily make the situation worse. There are not too many places in the world where you can live without an HVAC system. Hence preparing your home’s HVAC for spring should be at the top of your spring to-do list.
Cleaning the Hvac Unit
Your HVAC system faces dirt, snow, tree branches, etc., that accumulate over time throughout the winter season. Therefore the first thing to prepare your home’s HVAC for spring is to clean all types of debris and clutters from your HVAC system. Some houses have an indoor HVAC system, but they still require annual cleaning. You not only need to clean the system but also the surrounding area of it too. Because congested HVAC systems can quickly overheat, and that can result in system malfunction.
Clear Away Protective Sheets
Most of the time, people cover their HVAC systems with protective covers, sheets or tarps to keep them safe from snow or icy rain of the winter season. This way, the system stays protected, but you no longer need that extra layer of safety as soon as the spring arrives. Therefore, it is crucial to clear away all types of covers and protective sheets from your home’s HVAC system in the spring season.
The Winter season can do all types of damage to your HVAC unit. Therefore a general inspection before a thorough checkup is very crucial for the safety of the system. A simple assessment can offer you valuable information about any wear and tear to your home’s HVAC system. If you find any visual fault in your system, you can simply call for a repair before starting your HVAC system.
Change All the Air Filters
HVAC systems provide better air quality when compared with window ACs. This is mainly because all the air circulates through the HVAC systems and their air filters are much better. You will be able to maintain this level of cleanliness if you regularly change your air filters. It is almost mandatory to replace your air filters when the spring arrives. New filters can provide you with much cleaner air and reduce the risk of allergy from pollen or any other allergens.
Air Duct Cleaning
Air ducts are as crucial as air filters. Therefore you need to clean the air ducts too to get the best quality air for your home. If you didn’t clean the dust or any other build-up from your air ducts, changing the air filter can do nothing. This build-up can quickly reduce the airflow and force your HVAC system to work harder. This only increases the wear and tear of the system. While you are cleaning the air ducts, you can also inspect for any damage to the vents and fix it simultaneously.
Inspect the Condensation and Drain Piping
Every HVAC system has a condensation pump to drain out the moisture from the system. If this pump stops functioning correctly, you will face a flood in the house and water in the HVAC system. This situation can completely paralyze your home’s cooling unit. You also need to ensure that the drainpipes are clean and free from any dents or leakage. Problems with either of them can result in poor function of the HVAC system.
Inspect and Reset the Thermostat
Spring season requires different thermostat settings. Therefore inspect your thermostat for smooth functioning and reset the temperature according to your needs. You don’t need too much cooling in the spring because this season is much cooler than the summer. Therefore you don’t need to set your thermostat at a very low temperature.
Test the System
Once you have finished all the steps mentioned earlier, it is time to give a test run to your system. This will provide a better idea about the condition of your HVAC system. Sometimes you will encounter different noise as compared to the last time it was on. Just keep your system on for half an hour to see if there is any issues in HVAC or work efficiently. If you still feel uneasy about something, it is better to call a professional to give your home’s HVAC system a proper tune-up.
The Air Conditioner unit is very critical for your house or office. It will keep you comfortable in the summer and safeguard you and your family from the Read More
The Course of Action if Ac Won’t Turn on
If your AC unit won’t start, then the first thing you can do is check your circuit. Due to an unexpected power surge, the circuit tripped, stopping the power supply and stopping the AC unit from starting. The next thing you need to check is the thermostat of the AC unit. AC unit’s faulty wiring is also a critical reason that prevents some AC units from turning on. Therefore the next step is to check the wiring very carefully to ensure they are in good condition. A dirty filter and condenser can also prevent the AC unit from starting. The central part is to determine why your AC unit is not turning on. Once you have the answer to this question, fixing is not that difficult.
Every house or office has a main electrical panel that distributes the electricity to every electrical outlet in your home or office. Therefore the AC unit is also getting its electricity supply from this electrical panel. Circuit breakers are installed to safeguard the electrical equipment from electrical surges. In case of an electrical surge, these circuit breakers trip to protect your valuable equipment such as AC units, TV and refrigerators etc. Once your circuit breaker trips, then you have to reset it manually. Therefore inspecting the circuit breaker is the first thing you have to do if your AC won’t start. If the circuit breaker is tripped, then you reset it and start your AC.
A thermostat is a small device, primarily battery operated, which is controlling your AC unit. If your thermostat is not functioning correctly, it may not send the proper signal to your AC unit and prevent it from starting. The AC unit is perfectly fine in most cases but will not start until you fix the thermostat because the thermostat is the only way you send every command to your AC unit. It is very easy to judge that your thermostat is not functioning. If the screen of the thermostat is not on then, your AC won’t start. Now you have to change the batteries of your thermostat to make it work again. Once it comes back to life, then you can try to start your air conditioner again. In some cases, the thermostat is on but not responding to the pressing of any buttons. When this happens, it is a clear sign that you need a new thermostat.
Unclogging the Drain Line and Condensation Pump
A clogged drain line and condensation pump can also stop your AC from starting. Therefore trace your condensation pump because it helps draining out the moisture and dirt build up in your AC’s condensation tray to keep it clean and properly functional. Condensation pumps usually pump out all types of waste material through a drain line. Over time your drain line accumulates all the dirt and becomes clogged. This will prevent the condensation pump from draining anything through it. Now all the moisture and dirt slowly start to build up inside the AC unit. Once this reaches a certain level, your AC’s safety measures stop AC from working to prevent any further damage. Cleaning your clogged drain line and condensation tray is very easy. Here are some plumbing tips to clean clogged drain line. Once you unclogged all the build-up, you can check your AC by switching it on again.
An Issue With Your Capacitor
If all the above inspections are perfectly fine, then your AC unit is not working because of a faulty capacitor. This is the most common issue that is preventing your AC unit from proper functioning. Even though it is not very complicated to replace the capacitor of your AC unit, if you have no idea about it, you better call the experts to do it for you. An AC expert can test your capacitor and replace it right away, and your AC unit will start working in no time.
These are some quick fixes that you can utilize to start your AC unit again. If the problem persists, it is better to ask an expert’s advice. But before hiring someone to fix your AC unit, you must assess the condition of your AC unit. If your air conditioner is quite old, then you better replace it with a new one. Usually, the AC repair costs significantly, and it is not worth it if your AC unit is very old.
Decorating and painting a new home sounds fascinating. But other than this, plumbing is something that must be well taken care of. Decoration will bring out Read More
1. Handy on Tools
People who are ready to move into the new house must have some of the basic plumbing tools and equipment. This will help them to control the unwanted situation till the time a professional plumber comes and fixes the issue. For minor home repairs, an individual must have a toolkit with him. For instance, tape and plumber pliers are the basic things that must be kept at home for meeting some emergency situations.
2. Clearing Off a Slow Drain
As the house is newly built, there are some chances that the drain might not work properly. It can happen due to choking of dust or other material into the pipe when house construction was in progress. Thus, here comes the need to clear off the drain. A majority of times, this issue is most likely to happen in the bathroom sink. For this, the first step must be to grab a tool and pull out the hair accumulated around the sink. The next step is to warm some water and mix some vinegar in it so that all the impurities simply rush out. If something serious is there then a plumber must be contacted as soon as possible.
3. Kitchen Sink
A kitchen is a place where biodegradable waste can be found in enormous quantities. Many times, this waste also appears during the washing of dishes. Unknowingly, people throw that waste in the sink only. Due to this, with the passage of time, the sink gets clogged and chokes with that waste. With this problem the water drains slowly or sometimes does not drain at all. Therefore, people must have a look at the waste that they are throwing in the kitchen sink. Food debris must be avoided at all costs.
4. Placing a Strainer
It is best to use a strainer in the bathroom to avoid clogging of hair and other debris around the drainage. A strainer is a tool that is installed usually in the washroom so that waste does not accumulate near or around the drain. With this, there is the free manage flow of water into the drain without any obstacles. The pipes are not blocked and water runs down easily.
5. Water Heater
For heating up the water in the spine chilling winter season water heater or geyser is used by the majority of people. For this pipes are installed. But before installing a water heater, one must ensure its warranty and working condition. Once a heater is installed it is quite difficult to undo it and also is a little bit expensive. Thus, it must be checked properly so that it does not cause any problem in the future.
Leakage is a common plumbing problem that is faced by the majority of people. One must check all the connections and water taps to determine the leakage issue. In case, if the toilet is leaking then it must be fixed immediately by a plumber. To check the leakage, one can add a few drops of food coloring into the water tank. If the water changes its color then it is leaking and must be fixed.
7. Say no to Liquid Cleaners
Liquid cleaners must be avoided while cleaning the drains as they ruin the finishing and working capacity of pipes. These cleaners usually end up staying in the pipe for a long period of time and later on clogs and choke the pipe. For cleaning the pipes it is best to use plumbing tools like a hand snake or plunger. These effectively clean the pipes and also do not leave any kind of debris.
Showerheads and faucets accumulate a lot of dust and debris as these are in direct and regular contact with water. This, later on, leads to bacterial development and fungus on the sides of the shower. Thus, these must be cleaned on a regular basis. For this tools must be used. Other than this, vinegar can also be used to steer away from the dust easily.
In the nutshell, one can say, plumbing is an activity that cannot be ignored by an individual at any cost. Just like the exterior decoration, it is important to make the building strong internally. Otherwise, one has to face some serious consequences
When you notice that your shower pressure is dipping, becomes irritable and your bathtub will take forever to fill up, then you must be dealing with some Read More
1. Build Up of Debris
Debris build up in the supply pipe can considerably reduce the flow of water and cause a low water pressure. These debris, sand and other contaminants keep accumulating in your pipe and put a lot of pressure on the water flow, even completely clog the pipe sometime.There are many that can happen to your pipes. Main culprit is the hard water in your area, it means your water is already full of traces of minerals and over time these minerals can accumulate and build up in your pipes.Sometimes due to a small crack or opening in the pipe outside your house, small debris or sand can keep entering through it can also create a build up.Corrosion of pipe can also cause the sediments to build up and result in low water pressure at your house. Professional plumber can easily fix it by either replacing the pipes or cleaning it somehow.
2. Your Aerators Clogged
Aerator screens act as the final filter of the water at your house. It is at the bit end of the faucets. While it acts as a filter but it can very easily get clogged. Clogged aerators can decrease your water pressure. Similarly your shower heads can get clogged very easily and cause a huge dip in water pressure. Cleaning them is not a major issue, you can do it by yourself. If the problem isn’t solved by your cleaning then it is a good time to a professional to help you deal with the issue.
3. Low Capacity System
Low pressure can also be due to the low capacity of your system. Maybe you have a system that cannot handle all your requirements. If your house contains multiple bathrooms and you try to use them at the same time, maybe the pressure dips and that is due to the low capacity of your system that is not able to handle all your needs. You need to find ways to increase the capacity of your system to deal with this issue. You may have pressure issues with your hot water and it is mainly due to that your water heater cannot keep up with your needs or maybe due to a bad hot water valve in your hot water system.
4. Due to Water Shutoff Valve
Every home has multiple water shutoff valves because you need them in time of repair, but they can also be a cause for low pressure. If you recently had done a repair or maintenance then check properly if any valve is partially opened because that can reduce the water pressure. Sometimes you have a broken or stuck valve that can also reduce the water pressure considerably.
Water leaks can be another reason for drop in water pressure. But if this is the reason for your water pressure drop then you will easily be able to notice it because the drop in water pressure will be sudden and significant. Most of the time you can spot the leaks by finding water at random places where it is not supposed to be. Underground leaks can only be judged by the sudden decrease in water pressure and you need professional help to fix this issue. Underground leaks can damage your house, therefore you cannot delay in this situation and get a professional to help you. If you are seeking any leakage in AC, you have to professional to fix this issue immediately.
6. Bad Water Pressure Regulator
Sometimes the city water pressure is too high and to deal with this issue most of the houses have a water pressure regulator installed at their house. The issue is if the regular fails to perform or work then it can reduce the water pressure to very low to no water at all. If you are witnessing sometimes huge water pressure while other times no water then it may be due to a bad water pressure regulator. Again you need a professional to come and inspect the regulator. If he can fix it then good otherwise get a new one for your house.
7. Due to Low Municipal Supply
Sometimes the low water pressure is not because of any issue at your home. Sometimes it is the whole city’s problem. If your pipes can clog, so does the city’s pipe too. If you cannot figure out the reason for low water pressure, double check it with your neighbour and then call your city. These are 7 main reasons that can cause a low water pressure at your home. Nobody likes a low pressure at their house, therefore you need to keep your plumbing matters solved properly and in a timely fashion. Regular checkup of pipes, faucets and water heater can save you from a ugly situation like low water pressure.